AEG L 75480 FL Kullanıcı Kılavuzu - Sayfa 23

Yıkayıcı AEG L 75480 FL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 75480 FL 32 sayfaları.
Ayrıca AEG L 75480 FL için: Kullanıcı Kılavuzu (32 sayfalar)

Sayfayı Yazdır

11. TROUBLESHOOTING

The start of the appliance does not oc-

cur or it stops during operation.

First try to find a solution to the problem

(refer to the table). If not, contact the

service centre.

With some problems, the acoustic

signals operate and the display shows

an alarm code:

•

- The appliance does not fill with

water.

Problem

The appliance

does not fill with

water.

The appliance

does not drain the

water.

The appliance

door is open or

not closed cor-

rectly.

Possible cause

The water tap is closed.

The water inlet hose is

damaged.

The filters in the water

inlet hose is blocked .

The water tap is blocked

or is furred with lime-

scale.

The connection of the

water inlet hose is not

correct.

The water pressure is

too low.

The water drain hose is

damaged.

The filter of the drain

pump is blocked.

The connection of the

water drain hose is not

correct.

A washing programme

without the drain phase

is set.

The function Rinse &

Hold is on.

•

- The appliance does not drain

the water.

•

- The appliance door is open or

not closed correctly.

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before

you do the checks.

Possible solution

Open the water tap.

Make sure that the water inlet

hose has no damages.

Clean the filters. Refer to 'Care

and cleaning'.

Clean the water tap.

Make sure that the connection

is correct.

Contact your local water author-

ity.

Make sure that the water drain

hose has no damages.

Clean the filter of the drain

pump. Refer to 'Care and clean-

ing'.

Make sure that the connection

is correct.

Set the drain programme.

Close the door correctly.

ENGLISH