Brother P-Touch PT-P700 Kullanıcı Kılavuzu - Sayfa 4

Etiket makinesi Brother P-Touch PT-P700 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother P-Touch PT-P700 4 sayfaları. Electronic labeling system tze tape

Sayfayı Yazdır

Brother P-Touch PT-P700 Kullanıcı Kılavuzu

For Windows

Turn off the P-touch labeler.

From the Start menu, click [Devices and Printers].

Select [Brother PT-P700] and click [Remove device], or right-click the icon and click

[Remove device].

If a User Account Control message appears, type in the password, and then click [Yes].

Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,

and then click [Print server properties], which appeared on the menu bar.

Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control

message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],

and then click [Remove...].

Select [Remove driver and driver package], and then click [OK]. Follow the on-screen

instructions.

Close the [Print Server Properties] window. The printer driver has been uninstalled.

For Windows

Turn off the P-touch labeler.

Click [Control Panel] on the [Apps] screen - [Hardware and Sound] - [Devices and

Printers].

Select [Brother PT-P700] and click [Remove device], or right-click the icon and click

[Remove device].

If a User Account Control message appears, type in the password, and then click [Yes].

Select [Fax] or [Microsoft XPS Document Writer] in the [Devices and Printers] window,

and then click [Print server properties], which appeared in the menu bar.

Click the [Drivers] tab, and then click [Change Driver Settings]. If a User Account Control

message appears, type in the password, and then click [Yes]. Select [Brother PT-P700],

and then click [Remove...].

Select [Remove driver and driver package], and then click [OK]. Follow the on-screen

instructions.

Close the [Print Server Properties] window. The printer driver has been uninstalled.

For Mac OS X v10.6.8 - v10.8.x

Turn off the P-touch labeler.

Click [Apple menu] - [System Preferences], and click [Print & Fax] (OS X v10.6.8) /

[Print & Scan] (OS X v10.7.x/v10.8.x).

Choose [Brother PT-P700], and click [-].

Close the [Print & Fax] (OS X v10.6.8) / [Print & Scan] (OS X v10.7.x/v10.8.x) window.

The printer driver has been uninstalled.

Uninstalling the software

Perform this procedure only if the software is no longer necessary or when re-installing the

software.

To uninstall the software, follow the usual steps for your operating system.

Definition of the Status Lamp

The Status lamp on the P-touch labeler indicates the current operating condition.

Lamp

Not lit

Power is OFF.

Green lamp is lit

Power is ON.

Green lamp is flashing

Receiving data from the computer.

Transferring data.

The cassette cover is open. Close the cassette cover correctly.

Starting the reset procedure, or the Feed & Cut button was

Orange lamp is lit

pressed during the reset procedure.

For details on resetting the P-touch labeler, see

Troubleshooting.

Cooling (Wait for the temperature to cool down)

Orange lamp is flashing

Reset in progress. For details on resetting the P-touch labeler,

see Troubleshooting.

Red lamp is lit

The P-touch labeler is booting.

Indicates one of the following errors.

Red lamp flashes in 0.9 second intervals:

• No tape cassette

• Incorrect tape cassette installed

• Incompatible tape cassette installed

Red lamp is flashing

• The cassette cover was opened during printing

• Transmission error

• Overheating error

• Cutter error

Red lamp flashes in 0.3 second intervals:

• System error

Condition

Troubleshooting

Problem

After exiting P-touch Editor

There are three ways to restart. Perform any of the following.

Lite, how do I restart the

• Turn off the P-touch labeler and then turn it back on.

program while the P-touch

• Disconnect and then reconnect the USB cable while the

labeler is still on?

P-touch labeler is on.

• (For Windows

Launch P-touch Editor Lite from [My Computer].

I cannot turn the P-touch

Check to see that the batteries are installed correctly, or that

labeler on.

the included power adapter is securely connected.

I cannot exit P-touch Editor

Check to see if an error message is displayed, and try to

Lite.

resolve it. Please note that the software cannot be exited while

labels are being printed.

A blank horizontal line

Streaks or poor quality characters on printed labels generally

appears through the printed

indicate that the print head is dirty. Clean the print head using

label.

a cotton swab or optional print head cleaning cassette (TZe-

CL4).

* Do not touch the print head directly with your bare hands.

The label is difficult to cut.

Clean the cutter blade using a cotton swab moistened with

alcohol.

* Do not touch the cutter blade directly with your bare hands.

When the label is printed out,

When margins are set to [Large], labels print with approx. 1"

there is too much margin

(25 mm) margins on each side of the printed text. Reduce this

(space) on both sides of the

margin by changing the setting to [Small].

text.

On P-touch Editor Lite, right-click the mouse and select

[Margins] from the displayed menu. Change the setting to

[Small].

The P-touch labeler does not

• Check that the tape cassette has been inserted correctly.

print, or the printed

• If the tape cassette is empty, replace it.

characters are not formed

• Check the cassette cover is properly closed.

properly.

The power turns off when you

• The batteries may be weak. Replace them.

try to print.

• Check that the batteries are correctly inserted.

• An incorrect adaptor is being used; the recommended

adapter is the AD-E001.

The tape does not feed

• Check that the end of the tape feeds under the tape guides.

properly, or the tape gets

• The Feed & Cut button was used while printing. Do not touch

stuck inside the P-touch

the Feed & Cut button during printing.

labeler.

I want to reset the P-touch

With the P-touch labeler off, press and hold the Feed & Cut

labeler.

button while holding down the Power button. When the Editor

Lite lamp starts flashing and the Status lamp lights orange,

press the Feed & Cut button six times while continuing to hold

down the Power button. The P-touch labeler will be reset to the

factory settings.

Specifications

Product Specifications

Dimensions (W × D × H)

Approximately 3.1" (W) × 6.0" (D) × 5.6" (H)

(78 mm (W) × 152 mm (D) × 143 mm (H))

Weight

Approximately 1.6 lb (710 g) (without batteries and tape

cassette)

Power supply

AC adapter (AD-E001)

Six "AA" alkaline batteries (LR6)

Six "AA" Ni-MH rechargeable batteries (HR6)

Not included.

Visit us at http://solutions.brother.com/ for the latest information about the recommended

batteries.

Accessories

Tape cassette

Brother TZe tape (width)

0.13" (3.5 mm), 0.23" (6 mm), 0.35" (9 mm), 0.47" (12 mm),

0.70" (18 mm), 0.94" (24 mm)

AC Adapter

AD-E001

System Requirements

Operating System

Windows Vista

Windows

Hard-Disk Free Space

70 MB or more

Memory

Windows Vista

Windows

1 GB (32-bit) or 2 GB (64-bit)

or more

Display

SVGA/High Color or more

Please see the Brother Solutions Center (http://solutions.brother.com/) for the latest compatible

OS.

Solution

)

Macintosh

Windows

Mac OS X

v10.6.8/v10.7.x/v10.8.x

7/Windows

500 MB or more

2 GB or more

: 512 MB or

7/Windows

More than 256 colors

*1 *2