Brother P-touch PTE110VP Kullanıcı Kılavuzu - Sayfa 16
Etiket makinesi Brother P-touch PTE110VP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother P-touch PTE110VP 18 sayfaları. Electronic labeling system
Sayfayı Yazdır
Troubleshooting
Error messages
Message
The batteries are weak.
Battery
If using AAA alkaline batteries,
Low!
replace them with new ones (do not
use a combination of old and new
batteries).
If using Ni-MH batteries, charge them
fully.
The installed batteries are
Battery
exhausted and need to be replaced
Empty!
for continued operation.
Invalid! • An invalid number was entered as
the label length, tab length, cable
diameter, flag length or faceplate
length.
• An invalid letter or number to be
incremented was selected in the
Serialize function
No Text! • You tried to print a text file when
there is no data stored in the
memory.
•
entered.
•
text is entered.
•
entered.
•
text was entered while using
templates.
• You tried to enter a third line by
2 Line
Limit! /
pressing
1 Line
Limit!
• You tried to print or preview two
lines of text while 3.5 mm or 6 mm
tape was installed. Install a larger
tape size.
There is no cassette installed.
No
Install a cassette with the
Cassette!
or
Find Quality Products Online at:
Cause / Remedy
is pressed when no text is
+
is pressed when no
is pressed when no text is
or
was pressed when no
.
GlobalTestSupply
mark.
www.
Message
Cutter
Pressed
Text
Full!
Text
Limit!
Change
Length
Feed OK? Tape was fed after printing when
Wrong
Tape!
Use TZe
tape
mark
Cause / Remedy
The Tape Cutter Lever was
pressed in the middle of the printing
process.
The maximum number of
characters (80 characters for text)
have already been entered.
You may have exceeded the set
tape length. Reduce the text or
select [Auto] as the tape length.
[Chain Print] was selected. For
more information, see the Setting
Margins section.
Use a cassette with the
mark.
.com
mark or