Brother P-touch QL-1050N Kullanıcı Kılavuzu - Sayfa 12

Etiket makinesi Brother P-touch QL-1050N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother P-touch QL-1050N 24 sayfaları. Quick setup guide (español) - english
Ayrıca Brother P-touch QL-1050N için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Ağ Kullanıcı Kılavuzu (41 sayfalar), Hızlı Kılavuz (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (41 sayfalar)

STEP 1 Getting started

Close the DK Roll compartment cover until it

clicks on both sides.

4 Connecting the Power Supply

Connect the power cord to the

QL-1050/1060N and then plug the

power cord into a electrical outlet.

Check that the electrical outlet is

•

220V-240V AC before plugging the

power cord.

Unplug the power cord from the

•

electrical outlet after you have finished

using the QL-1050/1060N.

Do not pull the power cord when

•

unplugging it from the electrical outlet.

The wire in the power cord may

become damaged.

Do not connect the QL-1050/1060N to

•

the computer until directed to do so

when installing the printer driver.

The machine contains a label tray

which can hold up to 10 individual

label sheets.

As shown right, install the label tray

to the front face of the machine.

When printing more than 10 labels

•

continuously using the auto cut

function, remove the paper guide to

prevent a paper jam.

The plug may differ by countries.