AEG L 75483 FL Kullanıcı Kılavuzu - Sayfa 21

Yıkayıcı AEG L 75483 FL için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 75483 FL 32 sayfaları.

• The display shows an alarm code be-

cause of the problem with water

drain.

To clean the drain pump:

WARNING!

1. Disconnect the mains plug

from the mains socket.

2. Do not remove the filter

while the appliance oper-

ates. Do not clean the drain

pump if the water in the ap-

pliance is hot. The water

must be cold before you

clean the drain pump.

1. Open the drain pump door.

2. Pull the flap out to remove it.

3. Put a container below the recess of

the drain pump to collect the water

that flows out.

4. Press the two levers and pull for-

ward the drainage duct to let the

water flow out.

5. When the container is full of water,

put the drainage duct back again

and empty the container. Do steps

4 and 5 again and again until no

more water flows out from the

drain pump.

6. Pull back the drainage duct and

turn the filter to remove it.

7. Remove fluff and objects from the

pump.

ENGLISH