Fujitsu Lifebook S7020 Bios Kılavuzu - Sayfa 7

Dizüstü Bilgisayar Fujitsu Lifebook S7020 için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook S7020 29 sayfaları. Fujitsu lifebook s7020: software guide
Ayrıca Fujitsu Lifebook S7020 için: Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (43 sayfalar)

Fujitsu Lifebook S7020 Bios Kılavuzu
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what primary
devices are installed.
Main
Primary Master [MATSHITADVD-RAM UJ-841S-(PM)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode
Disabled
Control:
Enabled
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 3. Primary Master Submenu
Default
Description
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
at POST. If None is selected, the following Set-up items do not appear.
[Disabled]
This option cannot be changed when Auto is selected. Specify the num-
ber of sectors per block for multiple sector transfer.
[Disabled]
Enables or disables Logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
7
M a i n M e n u
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Setup Defaults
Save and Exit