Brother PT-98OOPCN Kullanıcı Kılavuzu - Sayfa 20
Etiket makinesi Brother PT-98OOPCN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother PT-98OOPCN 20 sayfaları. Electronic labeling system
Sayfayı Yazdır
3
After the installation is completed and
the screen shown below is displayed,
click [Close].
The installation of printer driver is
completed.
Next, install the P-touch Editor 5.0.
Double click "P-touch Editor 5.0
4
Installer.mpkg".
The P-touch Editor 5.0 Installer starts up.
Follow the on-screen instructions.
5
When the installation is completed and the
message "Click Restart to finish installing
the software" is displayed, click [Restart].
The Macintosh is restarted.
The installation of software is completed.
6
After restarting the computer, connect
your printer to the computer by using the
USB cable, and then turn on the printer.
AC adapter jack
AC adapter
18
USB port
USB cable
24V
DC IN
Note
●
If you are connecting the printer to
Macintosh via a USB hub, it may not be
detected correctly. If so, connect the printer
directly to the USB port on Macintosh.
For Mac OS X 10.3.9 - 10.4.x
7
Double click the drive where Mac OS X
is installed, and click in order of
"Applications" - "Utilities" -
"Printer Setup Utility".
For Mac OS X 10.5.x - 10.6
Click in order of "Apple menu" - "System
Preferences", and click "Print & Fax".
8
For Mac OS X 10.3.9 - 10.4.x
Click [Add] and choose USB at the top
of the screen.
Choose "PT-9700PC" from the list and
click [Add] again to add the printer to
the "Printer List".
For Mac OS X 10.5.x - 10.6
Choose "Brother PT-9700PC" from the list
and click [Add] /
the "Printer List" / "Print & Fax".
9
When the screen returns to "Printer
List" / "Print & Fax" screen, check
that "PT-9700PC/Brother PT-9700PC"
is added, and close the "Printer List" /
"Print & Fax" screen.
Now you can use the printer.
to add the printer to