Brother PT-E500 Hızlı Kurulum Kılavuzu - Sayfa 29

Etiket makinesi Brother PT-E500 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother PT-E500 46 sayfaları. Electronic labeling system
Ayrıca Brother PT-E500 için: Operatör El Kitabı (6 sayfalar)

Sayfayı Yazdır

Attribute

AC Adapter

• If you connect the AC adapter to the P-touch labeling system after you specified "Auto Power

Off", the setting for "AC Adapter" becomes valid.

• The default value is "1hr." for the AC Adapter and "30min." for the Li-ion battery.

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape

cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape. The tape may no longer be functional after the ink ribbon

discharges.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape

to jam.

Feed & Cut

The Feed & Cut function feeds 24.5mm of blank tape, and then cuts the tape.

Press the Feed & Cut key.

"Feed & Cut?" will appear on the LCD display.

Using the

The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the

tape is cut.

To exit or cancel this function press Esc.



Auto Power-Off Time

Value

Off

10min.

20min.

30min.

40min.

50min.

1hr.

2hr.

4hr.

8hr.

12hr.

Feeding Tape

key to select the "Feed & Cut" and then press either OK or Enter.

