AEG L 99695 HWD Kullanıcı Kılavuzu - Sayfa 41
Yıkayıcı AEG L 99695 HWD için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L 99695 HWD 48 sayfaları.
Ayrıca AEG L 99695 HWD için: Kullanıcı Kılavuzu (48 sayfalar)
16.5 The inlet hose
Do not use an extension hose if the inlet hose is too short. Contact the
service centre for the replacement of the inlet hose.
16.6 Water-stop device
A
16.7 Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide:
O
O
45
45
O
O
20
20
• Connect the hose to the back appliance.
Turn the inlet hose only left or right.
• Loose the ring nut to set it in the correct
position.
• Connect the water inlet hose to the cold
water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
If this occur, close the water tap and contact
the service centre to replace the hose.
ENGLISH
41