Fujitsu P3010 - LifeBook - Athlon Neo 1.6 MHz Başlangıç Kılavuzu - Sayfa 3
Dizüstü Bilgisayar Fujitsu P3010 - LifeBook - Athlon Neo 1.6 MHz için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu P3010 - LifeBook - Athlon Neo 1.6 MHz 9 sayfaları. Lifebook p series
Ayrıca Fujitsu P3010 - LifeBook - Athlon Neo 1.6 MHz için: Kolay Kullanım Kılavuzu (37 sayfalar), Teknik Özellikler (2 sayfalar), Bios Kılavuzu (14 sayfalar)
Sayfayı Yazdır
Initial Start Up
DC Power Jack
AC Cable
LAN or modem Jack
Display Cover
AC Adapter
Connecting a LAN Plug
Power/Suspend/
Resume Button
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable (not included) to the LAN jack on
your notebook and to a wall jack or to an Ethernet router.
Important:
During the setup procedure, do not disconnect the power supply,
press any buttons, or use any peripheral devices such as a
remote control.
• You should not attach any external devices and do not put a
DVD/CD in your drive until you have gone through the initial
power on sequence.
4. Booting the System
The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
Be careful when you select the language.
The only way to change the language
is to do a recovery process.
• Press the Power/Suspend/Resume button (above the
keyboard) to turn on the notebook. When you do this for
the first time, it will display a Fujitsu logo on the screen.
If you do nothing, the system will load the operating
system, and then the Windows Welcome will begin.
DO NOT SHUT DOWN YOUR SYSTEM BEFORE THE
FIRST BOOT IS COMPLETED.
If the system is shut down before the first boot is
completed and Microsoft
there is the risk that the system will not successfully
boot the next time you power up your notebook.
If this occurs, you will need to use the restore disc
to recover your system
5. Register
• After the operating system has initialized, the Windows
Welcome screen will appear. Accept the Microsoft
Windows
Licensing Agreement and the Fujitsu End
®
User License Agreement to proceed.
• Follow the on-screen directions as prompted. Accepting
the automatic update feature is recommended.
• If connected, you will be able to automatically access the
Internet. If not and plan to register at a later time, click
the Skip button.
• Once connected to the Internet, select Yes to continue
registration, complete requested information, and click
Next to complete registration.
• Register your notebook with Fujitsu by going to our website
at: us.fujitsu.com/computers. Ensure you are connected
to the Internet.
6. Registering Your LifeBook notebook
• Register your notebook with Fujitsu Service and Support via
our website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider
(ISP) to register online.
Windows
is setup,
®
®
®
3