AEG L6FBI842N Kullanıcı Kılavuzu - Sayfa 7

Yıkayıcı AEG L6FBI842N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L6FBI842N 36 sayfaları.

9. Remove the power supply cable and

the drain hose from the hose holders.

It is possible to see

water flowing from the

drain hose. This is due to

the testing with water of

the appliance in factory.

10. Remove the three bolts by using the

key supplied with the appliance.

11. Pull out the plastic spacers.

12. Put the plastic caps, that you find in

the user manual bag, in the holes.

We recommend that you

keep the packaging and the

transit bolts for any

movement of the appliance.

3.2 Installation on suspended

flooring

Suspended wooden floors are

particularly susceptible to vibration.

To limit vibration we recommend placing

a waterproof wooden panel, at least 15

mm thick, under the appliance. It should

be screwed to at least 2 floor beams and

should extend beyond the front feet.

If possible, install the appliance where

the floor is more stable.

3.3 Positioning and levelling

1. Install the appliance on a flat hard

floor.

Make sure that carpets do

not stop the air circulation

below the appliance.

Make sure that the

appliance does not touch

the wall or other units.

2. Loosen or tighten the feet to adjust

the level.

WARNING!

Do not put cardboard, wood

or equivalent materials

below the appliance feet to

adjust the level.

ENGLISH