AEG L6FBI847 Kullanıcı Kılavuzu - Sayfa 22
Yıkayıcı AEG L6FBI847 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L6FBI847 40 sayfaları.
Sayfayı Yazdır
22
www.aeg.com
The indicator of the Inicio/Pausa button
flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
12.6 Starting a programme
with the delay start
Touch the Inicio/Pausa button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The PROSENSE adapts
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Inicio/Pausa button to
pause the appliance. The related
indicator flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows
3. Touch the Inicio/Pausa button again
to start the programme immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Inicio/Pausa button to
pause the appliance. The related
indicator flashes.
2. Touch the Inicio Diferido button
repeatedly until the display shows the
desired delay time.
3. Touch the Inicio/Pausa button again
to start the new countdown.
12.7 Starting a programme
Touch the Inicio/Pausa button to start the
programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
12.8 The ProSense
Technology load detection
After touching the Inicio/Pausa
1. The ProSense Technology starts the
laundry load detection to calculate
the real programme duration. The
indicator
2. After about 15 minutes the display
shows the new programme duration:
the indicator
dots stops flashing.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
The ProSense Technology
detection is carried out with
complete washing
programmes only (no
skipping phase selected).
.
The ProSense Technology is
not available with all
programmes such
as :Lana/Lãs + Seda,
Aclarado/Enxag.,
Centrif.Drenar, and
programmes with short
cycles.
12.9 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
button:
and the time dots flash.
goes off and the time