Fujitsu V1020 - LifeBook - Core 2 Duo GHz Bios Kılavuzu - Sayfa 24
Dizüstü Bilgisayar Fujitsu V1020 - LifeBook - Core 2 Duo GHz için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu V1020 - LifeBook - Core 2 Duo GHz 28 sayfaları. V1020 getting started guide (french)
Ayrıca Fujitsu V1020 - LifeBook - Core 2 Duo GHz için: Başlarken (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), (İngilizce) Başlangıç Kılavuzu (2 sayfalar), (Fransızca) Manual D'introduction (2 sayfalar)
Sayfayı Yazdır
L i f e B o o k V S e r i e s B I O S
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM
is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if
the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive. The boot sequence ignores the new drive designations, however, your application software will use
the new designations.
Boot priority order:
Excluded from boot order:
F1
Help
ESC
Exit
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: CD/DVD Drive
4: NETWORK:
5:
6:
7:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
24
Phoenix TrustedCore(tm) Setup Utility
Info
System
Advanced
Boot Device Priority
1:
Floppy Disk Drive
2:
Drive0 HDD: FUJITSU MHW2120BH
3:
CD/DVD Drive
4:
NETWORK: Marvell LAN
5:
6:
7:
8:
:
USB MEMORY: None
:
USB HDD: None
Select Item
Select Menu
Figure 17. Boot Device Priority Submenu
Description
The boot selections determine the order in which the BIOS searches for the operating
system during a startup sequence. To change the order, highlight one source by using
the [up] or [down] cursor keys and then press the [+] or [-] key to change the order
number. Tapping [x] removes from the list a device that is not installed. Tapping [x] on
an item in the Excluded list adds the device to the Boot priority list. Be sure to save your
changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files
may be overwritten, depending upon your operating environment.
Security
Boot
-/Space
Change Values
Enter
Select
Sub-Menu
Exit
Item Specific Help
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
F9
Setup Defaults
F10
Save and Exit