AEG L6SE26C Kullanıcı Kılavuzu - Sayfa 9

Yıkayıcı AEG L6SE26C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L6SE26C 40 sayfaları.

4. To a stand pipe with vent-hole -

Insert the drain hose directly into a

drain pipe. Refer to the illustration.

The end of the drain

hose must always be

ventilated , i.e. the inner

diameter of the drain

pipe (min. 38 mm - min.

1.5") must be larger than

the external diameter of

the drain hose.

4. ACCESSORIES

4.1 Available in

www.aeg.com/shop or from

authorised dealer

Only appropriate

accessories approved by

AEG ensure the safety

standards of the appliance. If

unapproved parts are used,

any claims will be

invalidated.

5. Without the plastic hose guide, to a

sink spigot- Put the drain hose in the

spigot and tighten it with a clamp.

Refer to the illustration.

Make sure that the drain hose makes

a loop to prevent particles going into

the appliance from the sink.

6. Position the hose directly to a built-in

drain pipe in the room wall and

tighten it with a clamp.

4.2 Fixing plate kit

If you install the appliance on a plinth,

secure the appliance with the fixing

plates.

Read carefully the instructions supplied

with the accessory.

ENGLISH