Brother FAX 1840C Hızlı Kurulum Kılavuzu - Sayfa 7
Faks Makinesi Brother FAX 1840C için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother FAX 1840C 28 sayfaları. Quick setup guide - french
Ayrıca Brother FAX 1840C için: Parça Referans Listesi (28 sayfalar), Hızlı Kurulum Kılavuzu (18 sayfalar), Hızlı Kurulum Kılavuzu (16 sayfalar), (Fransızca) Manual De Configuration Rapide (16 sayfalar)
Sayfayı Yazdır
Print Quality Check
6
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Colour Start.
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
3
Check the quality of the four colour blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW/ MAGENTA)
Print Quality Check
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
4
If all lines are clear and visible, the quality is
acceptable. Press 1 (Yes).
If you can see missing short lines, press 2
(No) to begin the color cleaning process and
then follow prompts on the LCD.
OK
5
After cleaning is finished, press
Colour Start. The machine starts printing
the PRINT QUALITY CHECK SHEET again
and goes back to step
Poor
3
.
.
Setting the Date and
7
Time
1
Press Menu/Set.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the
dial pad, and then press Menu/Set.
Year:2004
(e.g. Enter 0 4 for 2004.)
5
Enter the two digits for the month on the dial
pad, and then press Menu/Set.
Month:03
(e.g. Enter 0 3 for March.)
6
Enter the two digits for the day on the dial
pad, and then press Menu/Set.
Day:01
(e.g. Enter 0 1.)
7
Enter the time in 24-hour format on the dial
pad, and then press Menu/Set.
Time:15:25
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)
8
Press Stop/Exit.
If you want to repeat input, press Stop/Exit
to start from Step
1
.
5