Fujitsu PRIMEPOWER 2500 Donanım Platformu Kılavuzu - Sayfa 37

Sunucu Fujitsu PRIMEPOWER 2500 için çevrimiçi göz atın veya pdf Donanım Platformu Kılavuzu indirin. Fujitsu PRIMEPOWER 2500 50 sayfaları. Enterprise servers
Ayrıca Fujitsu PRIMEPOWER 2500 için: Manuel (21 sayfalar)

Fujitsu PRIMEPOWER 2500 Donanım Platformu Kılavuzu
Limitations and known bugs
No
Recommended actions
5
For growfs(1M), the following patch is required to be installed.
120254-02 or later SunOS 5.10: ufs Patch
Install the above patches.
6
When using any of the following PGX cards and monitors, the display monitor does not
enter standby mode if you haven't logged on from CDE (Common Desktop
Environment).
PGX frame buffer (X3660A)
PGX64 frame buffer (X3768A/A-A)
Second monitor (X7128A/AA/AJ, X7128B)
To use PGX32 frame buffer (X3668A/A-A, X3668B/B-A/B-B), the following patches
are required to be installed.
119254-06 or later SunOS 5.10: Install and Patch Utilities Patch
119309-03 or later SunOS 5.10: PGX32 Graphics
The above removes the PGX frame buffer and monitor limitation. When using the PGX,
PGX64 frame buffer and a second monitor, ensure you turn off the power to the display
monitor when the monitor is not in use.
7
Some optional drivers are not yet supported with Solaris 10.
Contact your support engineer for details.
8
/etc/resolv.conf file might not be created when you select "DNS" name service during
OS installation.
Install the following patch.
119252-02 or later SunOS 5.10: System Administration Applications Patch
9
svccfg(1M) might be terminated when editprop subcommand is used.
# svccfg
svc:> select /network/inetd
svc:/network/inetd> editprop
:q
svccfg: unrecognized character "
Use setprop subcommand of svccfg(1M) instead of editprop to modify properties of
service.
10
For Kernel debugger (kmdb(1), mdb(1) -K) on SPARC64 GP, the following patches are
required to be installed.
118822-23 or later SunOS 5.10: kernel Patch
Install the above patch.
11
Solaris Live Upgrade using lu(1M) and lucreate(1M) might fail with the following error
when creating a mirror disk.
# lucreate -m /:/dev/md/dsk/d10:ufs,mirror –m \
/:/dev/dsk/c1t2d0s0,d11:attach -m/:/dev/dsk/c1t3d0s0,d12:attach -n newBE
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
ERROR: file system option <mirror> is not valid on this system
ERROR: cannot use file system configuration </:/dev/md/dsk/d10:ufs,mirror>
ERROR: cannot create new boot environment using file systems as configured
ERROR: please review all file system configuration options
ERROR: cannot create new boot environment using options provided
Remarks
Solaris 10
3/05 and
1/06 only
Solaris 10
3/05 only
Solaris 10
3/05 only
Solaris 10
3/05 only
31