AEG L7FE96CS Kullanıcı Kılavuzu - Sayfa 28
Yıkayıcı AEG L7FE96CS için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L7FE96CS 40 sayfaları.
Sayfayı Yazdır
28
www.aeg.com
For an efficient descaling action, we
suggest our products: Electrolux Clean &
Care and Electrolux descaler.
Always follow the
instructions that you find on
the packaging of the
product.
12.3 Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues,
bacterial growth and biofilm formation
inside the drum and the tub. This could
generate bad odours and mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
run a maintenance wash regularly (at
least once a month):
1. Remove all laundry from the drum.
2. Run a cotton programme with the
highest temperature with a small
quantity of powder detergent.
It is possible to use a special
hygienizing product, e.g.
Electrolux Clean & Care,
Electrolux Super Clean.
Always follow the
instructions that you find on
the packaging of the
product.
12.4 Door seal
Regularly examine the seal and remove
all objects from the inner part.
12.5 Cleaning the drum
Regularly examine the drum to prevent
rust particles.
For a complete cleaning:
1. Clean the drum with special products
for stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
2. Run a short cotton programme at
high temperature with empty drum
and with a small quantity of powder
detergent , in order to rinse out any
left residues.
12.6 Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener
and/or formation of mould in the
detergent dispenser drawer, once in a
while carry out the following cleaning
procedure:
1. Open the drawer. Press the catch
downwards as indicated in the
picture and pull it out.
1
2. Remove the top part of the additive
compartment to aid cleaning and
flush it out under running warm
water, to remove any traces of
accumulated detergent. After
cleaning, replace the top part in its
position.
2