Brother FAX-2940 Hızlı Kurulum Kılavuzu - Sayfa 11

Faks Makinesi Brother FAX-2940 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother FAX-2940 16 sayfaları. Quick setup guide
Ayrıca Brother FAX-2940 için: Hızlı Kurulum Kılavuzu (16 sayfalar), Drum Ünitesi Nasıl Değiştirilir (15 sayfalar)

Sayfayı Yazdır

Note

If you make a mistake and want to start again,

press Stop/Exit and go back to step a.

(USA only) The Telephone Consumer Protection

Act of 1991 makes it unlawful for any person to

use a computer or electronic device to send any

message via a telephone fax machine unless

such messages clearly contain, in a margin at the

top or bottom of each transmitted page, or on the

first page of the transmission, the date and time it

is sent and an identification of the business or

other entity or other individual sending the

message and the telephone number of the

sending machines or such business, other entity

or individual. To program this information into

your machine, see Set the date and

time on page 10 and Set your Station

ID on page 10.

Fax Transmission Report

Your Brother machine is equipped with a

Transmission Verification Report that can be used as

confirmation that you sent a fax. This report lists the

name or fax number of the receiving party, the date,

time, and duration of the transmission, the number of

pages transmitted, and whether or not the

transmission was successful. If you want to use the

Fax Transmission Report feature see Printing reports

in the Advanced User's Guide.

Set tone or pulse dialing

mode (Canada only)

Your machine comes set for a Tone dialing service. If

you have a Pulse dialing service (rotary), you need to

change the dialing mode.

Press Menu, 0, 4.

Press a or b to choose Pulse (or Tone).

Press OK.

Press Stop/Exit.

Set the telephone line

compatibility

If you are connecting the machine to a VoIP service

(over the Internet) you need to change the

compatibility setting.

Note

If you are using an analog telephone line you can

skip this step.

Press Menu, 2, 0, 1.

Press a or b to choose Basic(for VoIP).

Press OK.

Press Stop/Exit.

Dial Prefix

The dial prefix setting will automatically dial a

predefined number before every fax number you dial.

For example: If your phone system requires a 9 to dial

an outside number this setting will automatically dial 9

for every fax you send.

Press Menu, 0, 5.

(For Canada, press Menu, 0, 6.)

Enter the prefix number (up to 5 digits) on the

dial pad, and then press OK.

Note

• You can use the numbers 0 to 9, #, l and !.

(Press Hook/Hold to display "!".)

• You cannot use ! with any other numbers or

characters.

• If your telephone system requires a timed break

recall (hookflash), press Hook/Hold to enter the

break.

• If the pulse dialing mode is on, # and l are not

available to use. (Canada only)

Press Stop/Exit.