Fujitsu PRIMERGY BX924 S3 Manuel - Sayfa 2

Sunucu Fujitsu PRIMERGY BX924 S3 için çevrimiçi göz atın veya pdf Manuel indirin. Fujitsu PRIMERGY BX924 S3 13 sayfaları. Primergy

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

System-Architect.

Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

Please pay attention to the naming conventions:

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through

the configurator by following the lines from the top to the bottom.

Section

S26361-XXX-XXX

Memory XXX MB

X times

max. X times per system

In one chapter you can only select as many components (here 3x) as the arrow indicates.

Please note that there are information symbols which indicate necessary information.

For further information see:

http://ts.fujitsu.com/products/standard_servers/index.html

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/Pages/Currentconfigurators.aspx

Prices and availability see price list and PC-/ System-Architect

Subject to change and errors excepted

Memory, example

There are 3 free memory banks available.

The memory banks can be populated with 512MB, 1GB, 2GB and 4GB DDR Memory.

The maximum total amount of memory is 12GB.

It is possible to select memory upgrade options up to 3 times.

ECC with memory scrubbing-function and hot-spare memorybank is standard on the PRIMERGY BX600 S2 Server Blades.

S26361-XXX-XXX

Memory XXX MB

max. X times per system

Fujitsu PRIMERGY Server

System configurator and order-information guide

PRIMERGY BX924 S3

BX924 S3

Dual Server Blade S3

(internet)

Status: 2013-12-30

(extranet)

2 of 13