Fujitsu PRIMERGY RX200 S6 Servis Ek Kılavuzu - Sayfa 41

Sunucu Fujitsu PRIMERGY RX200 S6 için çevrimiçi göz atın veya pdf Servis Ek Kılavuzu indirin. Fujitsu PRIMERGY RX200 S6 50 sayfaları.

Figure 20: Removing the screws from the system board

Ê Remove the seven screws from the system board (see circles).

Ê Carefully shift the system board to the front of the server until the connectors

disengage from the cut-outs in the connector panel.

Ê Hold the system board on both sides and lift it carefully out of the housing.

Ê If installed, remove the TPM (see the

page

30).

Ê Verify the settings on the new system board (for a detailed description see

the "System Board D3031 for PRIMERGY RX200 S6 Technical Manual").

Ê Remove the processor(s) from the old system board and insert this

processor(s) in the new system board (description see the Options Guide).

RX200 S6

CPU 1

section "Replacing the TPM" on

Service Supplement

Replacement routines

CPU 2