Brother IntelliFax-1960C Kullanıcı Kılavuzu - Sayfa 35
Faks Makinesi Brother IntelliFax-1960C için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother IntelliFax-1960C 43 sayfaları. Digital cordless handset
Ayrıca Brother IntelliFax-1960C için: Broşür (2 sayfalar)
Sayfayı Yazdır
Error Message
Cause
There is no incoming call history.
No Caller ID
You did not receive calls or you
have not subscribed to the Caller ID
service from your telephone
company.
The cordless handset is too far from
Searching for
the machine (base unit).
Base Unit
You have not registered the
(Base Unit
cordless handset.
not detected)
Routine maintenance
Charging the battery
If your battery is getting low, you should
charge the battery. You can see the battery
strength at the bottom right of the LCD.
a
Make sure the AC adapter of the cradle
or the machine (base unit) is connected
to an AC power outlet.
b
Place the cordless handset in the cradle
with the dial pad facing forward.
Cleaning
Clean the outside of the cordless handset
with a soft cloth. You should also clean the
charger contacts. If the charger contacts are
not clean, the battery may not be charged.
Troubleshooting and Routine Maintenance
Action
If you want to use the Caller ID feature call your
telephone company. (See Caller ID in the User's
Guide.)
Bring the cordless handset closer to the machine
(base unit).
Register the cordless handset. (See Registering
additional cordless handsets on page 3.)
CAUTION
4
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
4
will damage the outside surface of the
cordless handset.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Clean the charger contacts as follows:
a
Unplug the cradle from the AC power
outlet.
b
Clean the charger contacts (1) for both
the cordless handset and the cradle with
a cotton swab.
4
1
4
4
24