Fujitsu SPARC Enterprise M3000 Ürün Notları - Sayfa 38
Sunucu Fujitsu SPARC Enterprise M3000 için çevrimiçi göz atın veya pdf Ürün Notları indirin. Fujitsu SPARC Enterprise M3000 42 sayfaları.
Ayrıca Fujitsu SPARC Enterprise M3000 için: Başlangıç Kılavuzu (8 sayfalar), Ürün Notları (38 sayfalar), Güvenlik ve Uyumluluk Kılavuzu (34 sayfalar)
Sayfayı Yazdır
Solaris OS Issues Fixed in Solaris 10 5/09 (Continued)
TABLE 9
CR ID
Description
6680733
Sun Quad-port Gigabit Ethernet Adapter UTP
(QGC) & Sun Dual 10 GigE Fiber XFP Low
Profile Adapter (XGF) NICs might panic under
high load conditions.
6689757
Sun Dual 10 GigE Fiber XFP Low Profile
Adapter (XGF) with a single or improperly
installed XFP optical transceivers might cause
the following error to show on the console:
The XFP optical transceiver is
broken or missing.
6725885
cfgadm will display non-existent SPARC
Enterprise M3000 system boards (SB1 to SB15).
Solaris Issues Fixed in Solaris 10 10/08
TABLE 10
encounter them in supported releases earlier than Solaris 10 10/08.
Solaris OS Issues Fixed in Solaris 10 10/08
TABLE 10
CR ID
Description
6608404
Hot-plug of the X4447A-Z, PCI-e Quad-port
Gigabit Ethernet Adapter UTP card might
cause other network devices to fail.
28
SPARC Enterprise M3000 Server Product Notes for XCP Version 1093 • July 2010
lists issues that have been fixed in Solaris 10 10/08 OS. You might
Workaround
This has been fixed in patch 139570-01.
[Workaround]
If possible, use the card in x8 slot. Otherwise,
there is no workaround.
This has been fixed in patch 139570-01.
[Workaround]
Check and make sure that both XFP optical
transceivers are firmly seated in the housing.
Do not mix INTEL and Sun XFP optical
transceivers in the same Adapter.
Do NOT plumb a port with the ifconfig
command if the port does not contain an XFP
optical transceiver or it contains one but the
transceiver is not in use.
This has been fixed in patch 140401-01.
The cfgadm output for SB1-SB15 can be
ignored.
Workaround
To avoid the defect, do not install this card.