Fujitsu SPARC Enterprise M5000 Özellikler Kılavuz - Sayfa 19
Sunucu Fujitsu SPARC Enterprise M5000 için çevrimiçi göz atın veya pdf Özellikler Kılavuz indirin. Fujitsu SPARC Enterprise M5000 30 sayfaları. Rci build procedure
Ayrıca Fujitsu SPARC Enterprise M5000 için: Tamamlayıcı Kılavuz (36 sayfalar), Ürün Notları (44 sayfalar), Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
Note – This manual is written based on the XCP 1093 firmware or later. When using
the XCP 1092 or earlier, see the following table and confirm the corresponding
commands.
COD-related Commands
TABLE 2
Features
Adding a key
Deleting a key
Displaying key
information
Setting resources
Displaying COD
information
Displaying COD
resource usage
Displaying log of key
addition/deletion
* Both commands can be used in the same way.
† The command output varies depending on the firmware version. For details, see the manual pages.
‡ The command is supported in XCP1101 or later.
For details about the commands, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual or manual pages.
XCP 1092 or Earlier
addcodlicense(8)
deletecodlicense(8)
showcodlicense(8)
Capacity on Demand (COD) Administration
XCP 1093 or Later
addcodlicense(8) or
addcodactivation(8)
deletecodlicense(8) or
deletecodactivation(8)
showcodlicense(8) or
showcodactivation(8)
†
setcod(8)
†
showcod(8)
†
showcodusage(8)
showcodactivationhistory(8)
*
*
*
‡
7