Fujitsu SPARC Enterprise M5000 Tamamlayıcı Kılavuz - Sayfa 19
Sunucu Fujitsu SPARC Enterprise M5000 için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Fujitsu SPARC Enterprise M5000 36 sayfaları. Rci build procedure
Ayrıca Fujitsu SPARC Enterprise M5000 için: Özellikler Kılavuz (30 sayfalar), Ürün Notları (44 sayfalar), Başlangıç Kılavuzu (4 sayfalar)
Sayfayı Yazdır
CHAPTER 1 RCI Build Procedure
This chapter explains the following items regarding the initial build procedure of the
Remote Cabinet Interface (RCI) in the installation work.
-
RCI Overview
-
RCI command
-
RCI Setup
1.1
RCI Overview
RCI is an interface to connect RCI Host (general name for main units supporting RCI
and for RCI I/O units).
In this manual, a base cabinet and an I/O unit that support the RCI are referred to as an
RCI Host and an RCI I/O unit, respectively. Furthermore, RCI Hosts and RCI I/O
units are generally referred to as RCI device.
To connect RCI I/O units or to use the RCI asynchronous monitoring functions for an
FJ cluster, a setup using the RCI setup commands is required in addition to the
connection with RCI cables.
1.1.1
Overview of RCI connection
There are two types of main unit: midrange servers equipped with one RCI and high-
end servers equipped with two RCIs.
I/O units include units equipped with one RCI and units equipped with two RCIs.
The following figures show different RCI connection patterns:
C120-E361-04EN
RCI Hosts
RCI
RCI
RCI I/O unit
Figure 1.1 Basic configuration
RCI
RCI I/O unit
1-1