Fujitsu teamserver M850i Yapılandırma Kılavuzu - Sayfa 29
Sunucu Fujitsu teamserver M850i için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu teamserver M850i 32 sayfaları.
Product
Produt ID
Keyboard/Monitor Shelf Kit
GP5-R1TB3
Keyboard/Monitor Enhanced Switch GP5-SB101
Keyboard/Monitor Extension Cables
GP5-411
Enhanced Keyboard
GP5-R1KB2
Storage System (Ultrawide SCSI)
GP5UR1DC2
Storage System (Ultra2wide SCSI) GP5UR1DC3
Hard Disk Cabinet (Single End)
GP5MS621A
Additional Shelf
GP5MS621SA
SCSI Card
GP5U121
SCSI Card
GP5-123
SCSI Card
GP5-125
SCSI Card
GP5-126
RAID Card
GP5U141
RAID Card
GP5U142
RAID Card
GP5-143
RAID Card
GP5-144
SCSI Cable
GP5U831
SCSI Cable
GP5S-832
SCSI Cable
GP5-837
SCSI Cable
GP5-838
SCSI Cable
GP5MU823A
SCSI Cable
GP5MU829A
SCSI Cable
GP5MU830A
teamserver Hardware
Models
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R R R R R
R R R R R R R R R
R R R R R R R
P P
P P P P P P P P P P P P P P P P
P P
P P P P P P P P P P P P P P P P
- - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - -
R R R
CRT/KB shelf for Rackmountable type *Only a 15''CRT can be installed on the CRT
storage table.
R R R
Switch enables sharing of a set of CRT,keyboard,and mouse by two or more servers
(up to four servers).
CRT/KB cable, CRT cable, KB/mouse cable is prepared separately.
R R R
CRT/KB cable , (CRT cablex1,KB cablex1 is attached)
R R R
87Key keyboard for Rackmountable type
R R R
8Hard Disk Drive Bays(Hotplugable)
Redundant HD/FAN(Two as a standard eqipment)/PSU(A GP5UR1PU1 is a standard
equipment, up to two) GP5-HDH45/HDH93/HDH81/ HDH94/HDH82 can be mounted.
Ultrawide SCSI
8Hard Disk Drive Bays(Hotplugable)
Redundant HD/FAN(Two as a standard eqipment)/PSU(A GP5UR1PU1 is a standard
equipment, up to two) GP5-HDH45/HDH93/HDH81/ HDH94/HDH82 can be mounted.
Ultra2wide SCSI
7Hard Disk Dirve Bays(Hotplugable)
14Bays is maximum (GP5MS621SA is used) Redundant HD/FAN(Up to
two)/PSU(GP5MSPU101A is standard equipment, up to two) GP5MHDH4GA/9GA
can be mounted. Ultrawide SCSI
Additional shelf only for GP5MS621A, Same as the basic shelf
Ultrawide, SE, x1ch, SMART not supported, Up to 40MB/s of syncronous transfer
support, Connector: half-pitch 68pin for external SCSI device, half-pitch 50/68pin for
internal SCSI device. To connect with GP5MS621A, GP5UR1DC2 or external SCSI
devices *SCSI cable is required
Ultrawide, differential-end, x1ch, SMART not supported, Up to 40MB/s of syncronous
transfer support, Connector:half-pitch 68pin for external SCSI device, half-pitch 50/68pin
for internal SCSI device For connection with Disk Array devices *SCSI cable is required
Ultrawide, SE, x1ch, SMART supported, Up to 40MB/s of syncronous transfer support,
Connector:half-pitch 68pin for external SCSI device, half-pitch 50/68pin for internal SCSI
device. For connection with internal and external SCSI devices *SCSI cable is required
Ultra2wide, LVD, x1ch, SMART supported, Up to 80MB/s of syncronous transfer support,
Connector:half-pitch 68pin for external SCSI divece, half-pitch 50/68pin for internal SCSI
device. For connection with internal and external SCSI devices *SCSI cable is required
RAID card, Ultrawide SCSI, SE, x2ch, 16MB cache, RAID level 0,1,5 are supported, For
internal/external array configuration *SCSI cable(for array configuration use)is reauired
RAID card, Ultrawide SCSI, SE, x2ch, 4MB cache, RAID level 0,1,5 are supported,
For internal array configuration *SCSI cable(for array configuration use)is required
RAID card, Ultrawide SCSI, x2ch, 8MB cache, RAID level 0,1,5 are supported, For
internal array configuration *SCSI cable(for array configuration use) is required
RAID card, Ultra2wide SCSI, LVD, x3ch, 32MB cache, RAID level 0,1,5 are
supported, For internal/external array configuration *SCSI cable(for array
configuration use) is required
Connection internal devices (0.7m) for C8xxi
For connection GP5-144 to GP5UR1DC3
Internal SCSI HDD connection(68pin) for C3xxi
Internal narrow SCSI cable for 5'' Bay (50pin) for C3xxi
SCSI-3(68pin)-SCSI-4(68pin), For connecting GP5U121/125 to GP5MS621A,
GP5UR1DC2 / GP5-126 to GP5UR1DC3(3.0m)
For connection between GP5U141 and GP5MS621A (2.0m)
For connection GP5U141 to GP5MS621A /GP5U141 to
GP5UR1DC2 (3.0m) A cable is required in 1ch
29
Remarks