Fujitsu 5530C2 - fi - Document Scanner Başlarken - Sayfa 14

Tarayıcı Fujitsu 5530C2 - fi - Document Scanner için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu 5530C2 - fi - Document Scanner 28 sayfaları. Color departmental scanner
Ayrıca Fujitsu 5530C2 - fi - Document Scanner için: Teknik Özellikler (2 sayfalar)

Sayfayı Yazdır

3. If the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click the [Cancel] button to close the

Wizard dialog box.

4. Insert the Setup CD-ROM into the CD drive.

⇒

appears.

This screen may not appear if the

ATTENTION

"AutoPlay" setting is set to off. In this case,

find "Install.exe" in the CD-ROM using

"Explore" or "My Computer" and execute

it.

5. Click [INSTALL PRODUCTS], and then click

[TWAIN Driver].

6. The Error Recovery Guide Installation dialog

box appears.

Error Recovery Guide is an application with

which you can view on-screen information for

troubleshooting errors that may occur in the

scanner. This guide helps solve problems, so

select [Yes] to install it. You may also choose

to install it later.

After you select [Yes] for installing Error

ATTENTION

Recovery Guide, the [Choose Setup Lan-

guage] dialog box appears. Select a lan-

guage and follow the on-screen

instructions. The Error Recovery Guide dia-

log box is automatically displayed when the

installation is complete. Wait until the instal-

lation of the TWAIN driver starts.

7. Select a language for the installation on the

[Choose Setup Language] dialog box, and then

click the [Next] button.

8. Install the driver, following the on-screen

instructions.

9. When you see the [InstallShield Wizard Com-

plete] dialog box, click the [Finish] button.

Depending on the state of the operating system, the

computer will once shut down and restart. In this case,

the computer detects the scanner when it starts up. Do

not remove the Setup CD-ROM from the CD drive until

the computer completely starts up again.