Fujitsu FI 4220C - Document Scanner Hızlı Kurulum Kılavuzu

Tarayıcı Fujitsu FI 4220C - Document Scanner için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Fujitsu FI 4220C - Document Scanner 2 sayfaları. Cleaning and consumable replacement instructions
Ayrıca Fujitsu FI 4220C - Document Scanner için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Resimli Parça Kataloğu (16 sayfalar), Kullanım Kılavuzu (13 sayfalar)

Fujitsu FI 4220C - Document Scanner Hızlı Kurulum Kılavuzu
Quick Installation Guide
Refer to the "fi-4220C Image Scanner Operator's Guide" when you would like
to know more about the scanner.
Refer to the "Scanner Utility for Microsoft
R
Windows
R
User's Guide" on the
Scanner driver CD-ROM when you would like to know more detailed information
about the FUJITSU TWAIN32 Scanner driver installation.
1
Check the scanner and accessories
Confirm that all of the following items are included.
USB interface cable
Scanner
Manual
FUJITSU TWAIN32
FUJITSU ISIS
Adobe
R
Acrobat
CD-ROM
Scanner Driver
Scanner Driver
CD-ROM
CD-ROM
CD-ROM
2
Release the Shipping Lock
Lock
Release
3
Attach the ADF paper chute
1.
Holding the ADF paper chute, insert it so that the two tabs on the chute
slot into the holes on the rear of the scanner.
Attach the ADF paper chute so that the side with the side guides is face up.
Carefully read the "fi-4220C Image Scanner Operator's
Guide" before using this product.
Particularly read and understand the "Safety Precautions"
before using this product.
fi-4220C Image Scanner
Operator's Guide
ADF paper chute
fi-4220C Quick Installation Guide
R
5.0
FUJITSU ISIS Scanner Driver
AC cable
AC adapter
Quick Installation Guide
Make sure to slide the shipping lock in place (located on the bottom of
the scanner) to secure the internal carrier unit during transportation.
After transporting and placing the scanner, tilt the scanner (approx. 30
degrees) and release the shipping lock.
See the "fi-4220C Image Scanner Operator's Guide" for further details.
ADF paper chute
tab
Side guide
4
Connect the USB interface cable, SCSI interface cable and the AC cable
Confirm that the power of PC and the image scanner device is
Caution
turned off.
1.
Connect either the USB interface cable or the SCSI interface cable.
R
R
When using Windows
95, Windows NT
4.0,connect the SCSI interface cable.
Connecting the USB interface cable
1
Connect the PC end of the USB interface cable to the PC.
2
Connect the scanner end of the USB interface cable to the scanner.
Connecting the SCSI interface cable
1
Connect the PC end of the SCSI interface cable to the PC.
2
Connect the scanner end of the SCSI interface cable to the scanner.
3
Check the SCSI ID switch.
The SCSI ID switch is set to No. 5. If another device has the same ID then change the SCSI
ID. Refer to the "fi-4220C Image Scanner Operator's Guide" for information about the
procedure to change the SCSI ID.
• It is necessary to separately purchase a SCSI interface cable and a
SCSI card which are available commercially. See "fi-4220C Image
Caution
Scanner Operator's Guide" for details.
• Connect the scanner so that it is the terminator SCSI device.
2.
Connect the AC adapter with the AC Cable, and then connect it to the DC inlet on the
Scanner.
5
-a
Install FUJITSU TWAIN32 Scanner driver
R
Windows
Install the mini-driver first, and then the TWAIN data source.
Caution
If the old version of FUJITSU TWAIN32 Scanner driver has been installed on your personal computer, refer to the
R
"Scanner Utility for Microsoft
Windows
R
The Windows
XP screen samples are shown below. The screen
and operations will differ slightly depending on the OS that is
being used.
Preparation
Confirm that the Scanner is connected to your personal computer
with the USB interface cable or SCSI interface cable.
Installing the mini-driver
1.
Turn on the power by pushing the power switch on the scanner's control
panel.
The green LED on the control panel lights. The Function No. display
shows to the order "8","P","0","1". When Function No. display
reaches "1" the scanner is ready.
2.
Turn on your personal computer and log on to Windows
R
R
When using Windows
2000 or Windows
XP log on as an
administrator . The "Found New Hardware Wizard" dialog box is
displayed.
3.
Check "Install from a list or
specific location (Advanced)",
then click [Next].
R
For Windows
Me, check "Specify the location of the driver
(Advance)", then click [Next].
R
R
For Windows
2000 and Windows
98, clicking on [Next] the select
search method screen is displayed.
• For Windows
R
98, select "Search for the best driver for your
devise. (Recommended)" then click [Next].
R
• For Windows
2000, select "Search for a suitable driver for my
device (Recommended)" then click [Next].
3.
Insert the AC cable into the power outlet.
Next, install the FUJITSU TWAIN32 Scanner driver.
SCSI interface
USB interface
connector
connector
USB interface cable(*1)
SCSI interface cable(*1)
*1) Connect to your PC.
*2) Connect to the power outlet.
R
When using Windows
98, Windows
R
or Windows
XP, perform the procedure in step
complete installation.
R
When using Windows
95 or Windows NT
procedure in
to complete the installation.
R
R
R
98,Windows
Me,Windows
2000,Windows
R
User's Guide" on the Scanner driver CD-ROM, and update the mini-driver.
4.
Insert the Scanner driver CD-ROM
5.
Select "Search for the best
driver in these locations".
Check "Include this location in
the search:" then specify
D:\Driver2 (When your CD-
ROM is the D drive). After that
click [Next].
R
.
R
For Windows
98, just check "Specify a location:" then specify
D:\Driver2 (When your CD-ROM is the D drive). After that click
[Next].
R
For Windows
Me, select "Search for the best driver for your
device." Check "Specify a location" then specify D:\Driver2 (When
your CD-ROM is the D drive). After that click [Next].
R
For Windows
2000, just check "Specify a location" and then in the
next screen specify "Copy manufacturer's files from:" then specify
D:\Driver2 (When your CD-ROM is the D drive), then click [OK].
Continued on next page
DC inlet
AC cable(*2)
R
R
Me, Windows
2000
to
R
4.0, perform the
XP
P3PC-E057-03EN