Fujitsu fi 5750C - Document Scanner Başlarken - Sayfa 14

Tarayıcı Fujitsu fi 5750C - Document Scanner için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu fi 5750C - Document Scanner 40 sayfaları. Image scanner
Ayrıca Fujitsu fi 5750C - Document Scanner için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Kurulum Prosedürleri (3 sayfalar), Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (11 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (19 sayfalar), Temizlik Talimatları (2 sayfalar), Temizlik ve Bakım (39 sayfalar), Temizlik Talimatları (2 sayfalar)

Sayfayı Yazdır
Fujitsu fi 5750C - Document Scanner Başlarken
1.1 Checking the contents of
scanner package
When you unpack the scanner package, make sure
that the package contains all the parts on the list
included in the package.
If any parts are missing or defective, contact your
sales representative. Handle the scanner and
accessories with care.
1.2 Names and function of
parts
This section describes the names of parts and their
functions.
Front (Flat Bed unit opened view)
•
No.
Name
1
Document
Cover
2
Document Bed
3
Document
Holding Pad
4
ADF Lock
Screws
1-2
TABLE 1.
Function
When closed, this cover
fixes the document set on
the reading position.
For scanning documents
with the Flat bed, place
the document here.
It fixes the document by
pressing it onto the
document bed.
Used to fix the ADF.
They are securing the
ADF during
transportation.
No.
Name
5
Screw Storage
Holes
6
Handle
Front
•
No.
Name
7
Operator Panel
8
ADF Paper
Chute
9
Shipping Lock
10
ADF Button
11
ADF
(Automatic
Document
Feeder)
12
Stacker
TABLE 1.
Function
Holes in where the ADF
Lock Screws are placed
after unlocking the ADF.
Used to open/close the
Document Cover.
TABLE 2.
Function
This panel consists of a
Function No. display,
four buttons and a LED.
For scanning documents
with the ADF scanning,
place the document here
adjusting the side guides
to the document width.
Used to fix the Flatbed's
carrier unit in order to
prevent damages during
transportation.
Press this button to open
the ADF.
It transports a document
to the reading position
automatically. According
to need, this unit can be
set in three directions by
turning and sliding it.
Scanned documents are
ejected from the ADF
onto this tray. It is
possible to change the
height.