Fujitsu fi 5750C - Document Scanner Başlarken - Sayfa 18

Tarayıcı Fujitsu fi 5750C - Document Scanner için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu fi 5750C - Document Scanner 40 sayfaları. Image scanner
Ayrıca Fujitsu fi 5750C - Document Scanner için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Kurulum Prosedürleri (3 sayfalar), Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (42 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (11 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (19 sayfalar), Temizlik Talimatları (2 sayfalar), Temizlik ve Bakım (39 sayfalar), Temizlik Talimatları (2 sayfalar)

Sayfayı Yazdır
Fujitsu fi 5750C - Document Scanner Başlarken

2.1 Installing the scanner

1.
Place the scanner at its installation site.
For details on the scanner's dimensions
and required installation space, refer to "10
SCANNER SPECIFICATION" in the "fi-
5750C Operator's guide".
2.
Unlock the Shipping Lock.
After placing the scanner to the installation
site, switch the Shipping Lock into the
opened (unlocked) position.
Horizontal position: Lock
Vertical position: Unlock
3.
Remove the ADF Lock Screws.
After placing the scanner to the installation
site, remove the ADF Lock Screws and
place them into the Storage Holes. For
more details about positioning of the ADF
refer to "Appendix 4 Setting the position of
the ADF" on page 9.
4.
Setting the ADF Paper Chute.
Hold the ADF paper chute and insert
its tabs into the holes on the rear side
of the ADF as shown in the figure
below so that the side guides facing
upwards.
2-2
5.
Setting the Stacker
Mount the Stacker onto the scanner
aligning the protrusions to the holes on the
scanner.
You can fix the stacker at two positions: the
upper position or the lower position.
6.
Connecting the Power cable.
Use only the AC cable included the
scanner package.
ATTENTION
7.
Connect the Power cable to a power
outlet.
2.2 Connecting the scanner to
your PC
When running Windows 95 and/or Windows
NT 4.0, connect the scanner to your PC with
the SCSI interface cable. When running Win-
dows 98, Windows Me, Windows 2000 and/or