Brother MFC-680W Hızlı Kurulum Kılavuzu - Sayfa 14

Faks Makinesi Brother MFC-680W için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother MFC-680W 37 sayfaları. Brother multifunction printer quick setup guide

Sayfayı Yazdır
STEP 1
Setting Up the Machine
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
the incorrect character, press Clear/Back.
Press
One
key
time
2
3
4
5
6
7
8
9
6
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.
For details, see Entering Text in
Appendixes C of the User's Guide.
10
Setting tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Tone/Pulse.
4
Press
Press OK.
5
Press Stop/Exit.
12
to move the
or
to move the cursor to
Two
Three
times
times
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
T
U
V
W
X
Y
or
to choose Pulse (or Tone).
11
Setting the telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly by completing the following steps.
1
Press Menu.
2
Four
Press a or b to choose Initial Setup.
times
Press OK.
2
3
Press a or b to choose Phone Line Set.
3
4
4
Press
5
(or Normal).
6
Press OK.
5
S
Press Stop/Exit.
8
Z
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Branch Exchange (PBX). Your machine can be
connected to most types of PBX. The machine's
recall feature supports timed break recall only (TBR).
TBR will work with most PBX systems allowing you to
gain access to an outside line, or send calls to another
extension. The feature works when the R key is
pressed.
or
to choose PBX, ISDN