Fujitsu fi-5015 Başlarken - Sayfa 7

Tarayıcı Fujitsu fi-5015 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu fi-5015 12 sayfaları.

Sayfayı Yazdır

5. Click [INSTALL], and then click [ISIS Driver].

6. Error Recovery Guide Installation dialog box

appears.

Error Recovery Guide is an application with

which you can view on-screen information for

troubleshooting errors that may occur in the

scanner. This guide helps solve problems, so

select [Yes] to install it. You may also choose

to install it later.

After you select [Yes] for installing Error

ATTENTION

Recovery Guide, the [Choose Setup Lan-

guage] dialog box appears. Select a lan-

guage and follow the on-screen

instructions. The Error Recovery Guide

dialog box is automatically displayed when

the installation is complete. Wait until the

installation of the ISIS starts.

7. Select a language for the installation on the

[Choose Setup Language] dialog box, and then

click the [Next] button.

8. Install the driver, following the on-screen

instructions.

9. When you see the [InstallShield Wizard Com-

plete] dialog box, click the [Finish] button.

Your computer will restart and detect the scanner. Do

not remove the Setup DVD-ROM from the DVD drive

until your personal computer completely starts up again.

Depending on the operating system you

ATTENTION

are using, you may need to do the follow-

ing.

Windows 2000:

If you see the [Digital Signature not

Found] dialog box, click [Yes].

Windows Vista:

If you see the [Found New Hardware] dia-

log box, select [Locate and install driver

software], and then in the [User Account

Control] dialog box, click the [Continue]

button, if it is displayed.

Software Operation Panel

You can configure settings related to scanning and man-

age consumables using the Software Operation Panel. It

is installed together with TWAIN driver/ISIS driver.

Error Recovery Guide

Error Recovery Guide is a software that displays trou-

bleshooting information on screen if any scanner error

occurs.

If you did not install together the Error Recovery Guide

with the driver, please proceed with the procedures

given below for installing it.

1. Insert the Setup DVD-ROM into the DVD drive.

⇒

<SETUP DICS STARTUP SCREEN> appears.

2. Click [INSTALL].

3. Click [Error Recovery Guide] on the next

screen.

4. Select a language to use for the installation in

the <Choose Setup Language> window and

click [OK].

5. Install the application following the instructions

in the window.

6. When the [InstallShield Wizard Complete]

screen displays, click [Finish].