Fujitsu FI-5900C Başlarken - Sayfa 16

Tarayıcı Fujitsu FI-5900C için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu FI-5900C 30 sayfaları. Consumable replacement and cleaning instructions
Ayrıca Fujitsu FI-5900C için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Kurulum Prosedürleri (3 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Tamamlayıcı Kılavuz (4 sayfalar), Başlarken (30 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (24 sayfalar), Değiştirme Prosedürü (22 sayfalar), Temizlik Talimatları (2 sayfalar)

Sayfayı Yazdır
Fujitsu FI-5900C Başlarken
8. Image Processing Software Option installation
windows appears.
The Image Processing software is an optional
software that provides advanced binarization
image processing to the scanner dirver.
Selecting [Yes] in the Image Processing
ATTENTION
Software Option installation window will
automatically execute the installation. Clic
the [OK] button on the confirmation mes-
sage that appears when the installation is
complete. After that the TWAIN driver
installation is started.
9. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
10. Install the TWAIN driver following the instruc-
tions in the window.
11. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
Your computer will be restarted and the scanner will be
detected. Do not remove the Setup CD-ROM from the
CD drive until your PC has completely restarted.
Depending on the OS, the following oper-
ATTENTION
ations may be necessary.
For Windows 98:
When a request for inserting the CD-ROM
of Windows 98 appears, insert it into the
CD drive and click [OK].
For Windows 2000:
When [Digital Signature not Found]
appears, click [Yes].
8
Installation of the scanner driver is completed.
To confirm whether the installation was
ATTENTION
successful, perform a scanning operation
with an application that complies with the
TWAIN standards such as ScandAll 21.
■ Installing ScandAll 21
"Scandall 21" is an image capturing software that com-
plies with the TWAIN standard.
When using Windows NT 4.0, Windows
ATTENTION
2000 or Windows XP, log on as a user with
"Administrator" privileges
1. Insert the Setup CD-ROM into a CD drive.
⇒
<SETUP DISK START UP SCREEN>
appears.
2. Click [INSTALL PRODUCTS]
3. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
4. Continue to install the application following the
instructions in the window.
5. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish]
[ScandAll 21].