Fujitsu fi-6670 Series Kullanıcı Kılavuzu - Sayfa 13

Tarayıcı Fujitsu fi-6670 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu fi-6670 Series 26 sayfaları. Image scanner
Ayrıca Fujitsu fi-6670 Series için: Kurulum Prosedürleri Kılavuzu (6 sayfalar), Broşür (2 sayfalar), Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (14 sayfalar), Başlangıç Kılavuzu (26 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (22 sayfalar)

3) Gently close the Document Cover.

4) Change the position of the ADF.

AUTION

The ADF can be set to any of the following three positions:

After repositioning the ADF, be sure that the ADF is firmly locked to the new position.

■

Traditional (Factory default)

■

Standard (Space-saving type and for right-handed

operators)

Slide the ADF toward the center of the scanner.

Note the following explanation in this manual is based upon

this standard type of the scanner.

■

Reversed (Space-saving type and for left-handed

operators)

Slide the ADF toward the center of the scanner, and then

rotate it counterclockwise by 180 degree.

Attach the Stacker and the ADF Paper Chute to the scanner.

1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.

2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.

Protruding section

• Be careful not to pinch your fingers when moving the ADF.

• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.

Hook

2 Installing the Scanner