Fujitsu fi-7300NX Sarf Malzemesi Değiştirme ve Temizleme Talimatları - Sayfa 4
Tarayıcı Fujitsu fi-7300NX için çevrimiçi göz atın veya pdf Sarf Malzemesi Değiştirme ve Temizleme Talimatları indirin. Fujitsu fi-7300NX 27 sayfaları. Image scanner
Ayrıca Fujitsu fi-7300NX için: Başlarken (2 sayfalar)
Sayfayı Yazdır
Cleaning the Outside of the Scanner
Scanner
The scanner including the ADF paper chute (feeder) and the stacker should be cleaned with either a piece of dry
cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet of Cleaning Wipe.
ATTENTION
To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
Be careful not to let any moisture or water inside the scanner during cleaning.
It may take a long time to dry if an excessive amount of Cleaner F1/mild detergent is used. Use only a small
amount. Wipe off the cleaner completely to leave no residue on the cleaned parts.
Touch screen
To avoid the surface of the touch screen becoming dirty, clean it regularly by gently wiping dirt and dust off with
a soft, dry cloth.
Clean the touch screen with care. Do not rub or tap the surface with hard objects as doing so may damage the
surface.
ATTENTION
Do not wipe the touch screen with a damp cloth.
Dust on the surface may become stuck between the touch screen and the scanner, causing the touch screen to
malfunction.