Fujitsu Fujitsu fi-5950 Başlarken - Sayfa 13
Tarayıcı Fujitsu Fujitsu fi-5950 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu Fujitsu fi-5950 27 sayfaları. Image scanner
Ayrıca Fujitsu Fujitsu fi-5950 için: Broşür ve Teknik Özellikler (4 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatları (24 sayfalar), Başlarken (11 sayfalar)
Sayfayı Yazdır
Chapter2
2.1 Installing the Scanner
1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to the fi-5950
Operator's Guide, chapter "10. Scanner Specifi-
cations".
•
The scanner weight is 50 kg (110 lb).
ATTENTION
Make sure two persons are available
when moving the scanner.
•
When carrying the scanner, only grip the
bottom side.
2. Connect the AC cable to the Power inlet of the
scanner and plug it into an outlet.
Use only the power cable provided by the
ATTENTION
manufacturer.
The Function Number Display and the LED
HINT
may flash for an instant when plugging the
AC cable into the outlet. This is not a mal-
function.
INSTALLATION OF THE SCANNER
2.2 Connecting the Scanner to
Your PC
Connect either using the USB or SCSI interface.
This scanner is provided with two inter-
ATTENTION
faces: Ultra SCSI and USB 2.0 /1.1. Con-
nect only one of the USB or SCSI cable.
■ Connecting the USB Interface
1. Connect the USB cable to the USB connector.
2. Connect the other end of the USB cable to
your PC.
•
Be sure to use the USB cable which
ATTENTION
comes with this scanner. Correct opera-
tion with commercially available cables
is not guaranteed.
•
When connecting to a USB hub, use the
first stage USB hub that is closest to the
computer. If you use the second or later
hub stages, the scanner may not oper-
ate correctly.
•
If you connect the scanner with USB 2.0,
it is required that the USB port and Hub
are compliant with USB 2.0. The scan-
ning speed may slow down if it is con-
nected with USB1.1.
3. Press the "I" side of the main power switch to
turn on the scanner.
4
OFF
ON