Fujitsu M3097G Plus Kurulum Prosedürleri Kılavuzu - Sayfa 5
Tarayıcı Fujitsu M3097G Plus için çevrimiçi göz atın veya pdf Kurulum Prosedürleri Kılavuzu indirin. Fujitsu M3097G Plus 7 sayfaları. Scsi scanner installation procedures for windows nt 4.0
Ayrıca Fujitsu M3097G Plus için: Kurulum Prosedürleri Kılavuzu (9 sayfalar), Kurulum Prosedürü (5 sayfalar)
Sayfayı Yazdır
Fujitsu SCSI Scanner Installation Procedures
Step E: Unlocking the shipping lock.
If your model scanner does not have a flatbed then proceed to Step F.
The flatbed model scanners typically include a lock on the flatbed designed to protect
the scanner during shipment. Before the scanner can be used the shipping lock must be
unlocked. To unlock it do the following:
1. Located the shipping lock slider tab or knob underneath the end of the scanner.
2. Slide or rotate the lock to the unlock position.
If your model has the old style "L" bracket shipping lock.
3. Slide the scanner to its side as shown in figure below.
4. Unscrew the retainer screw and remove the shipping bracket.
5. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure below)
6. Place scanner back in its normal position
Rev051906A
Windows 95\98\98SE\ME\2000\XP
Page 5 of 7