Brother DCP-315CN Hızlı Kurulum Kılavuzu - Sayfa 23
Yazdırma Sunucusu Brother DCP-315CN için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother DCP-315CN 33 sayfaları. Brother dcp-115c: quick start
Ayrıca Brother DCP-315CN için: Hızlı Başlangıç Kılavuzu (33 sayfalar)
Sayfayı Yazdır
Installing the Driver & Software
®
For Mac OS
9.1 to 9.2
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
1
Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OS 9.1-9.2 icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and restart
®
your Macintosh
.
7
Lift the scanner cover to its open position.
®
.
8
Connect the USB cable to the USB socket
marked with a
USB socket above and to the left of the ink
cartridge slots, as shown below.
9
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine.
Then, connect it to your Macintosh
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
10
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
Macintosh
symbol. You will find the
®
.
®
21