Fujitsu M4099D Kurulum Prosedürleri - Sayfa 3

Tarayıcı Fujitsu M4099D için çevrimiçi göz atın veya pdf Kurulum Prosedürleri indirin. Fujitsu M4099D 3 sayfaları. A3 duplex document scanner
Ayrıca Fujitsu M4099D için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür (2 sayfalar), Kurulum Prosedürleri (3 sayfalar), Kurulum Prosedürleri (3 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Şartname Sayfası (2 sayfalar), Temizlik Talimatları (2 sayfalar)

Fujitsu SCSI

Scanner Installation Procedures with

scanner. There are two LED's on the grayscale adaptor (GSA) card installed in

the scanner. During scanner power up both LED's will be on. After the first

scanner reset the green LED will turn off. Then after the second scanner reset

the yellow LED will turn off indicating that the scanner is ready and

communicating to the host PC.

Step E: Scanning with VCDEMO

1. Go to Start, Programs, Kofax VRS or Kofax Image Controls, and select

VCDEMO.EXE.

2. Next go to Source, Scanner, and click on the drop down arrow; then

select either the Fuji 4097or Fuji 4099 Virtual Rescan Source. Wait a few

seconds for the Kofax engine to load, and then place your documents in the

scanner.

3. Now go to Source, Properties and select your scanning parameters (i.e.

scan source - Flatbed or ADF, resolution, paper size).

4. Next right click on the VRS symbol in your system tray (lower right corner of

the screen) to access the VRS configuration settings.

5. Afterwards go to Source, and click on Process Image for single page scans

or Process Batch for multi-page batch scans.

Congratulations! You have successfully completed and tested your VRS scanner

installation.

Step F: Installing third party software applications.

After you have successfully installed all the Fujitsu software and hardware, then it is

time to install any additional third party scanning software that you wish to use. Please

follow the software manufacturer's instructions for installation. Remember when

installing any software that contains Kofax's Image Controls pay close attention to the

individual runtimes. It is strongly recommended that you install the oldest/lower

runtime application first.

Rev010807L

Windows 2000 / XP

VRS (GSA-1)

Page 3 of 3