Fujitsu PA03338-B005 - FI-5750C Image Scanner Başlangıç Kılavuzu - Sayfa 18

Tarayıcı Fujitsu PA03338-B005 - FI-5750C Image Scanner için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu PA03338-B005 - FI-5750C Image Scanner 42 sayfaları. Image scanner

Sayfayı Yazdır

2.1 Installing the scanner

Place the scanner at its installation site.

For details on the scanner's dimensions

and required installation space, refer to "10

SCANNER SPECIFICATION" in the "fi-

5750C Operator's guide".

Unlock the Shipping Lock.

After placing the scanner to the installation

site, switch the Shipping Lock into the

opened (unlocked) position.

Horizontal position: Lock

Vertical position: Unlock

Remove the ADF Lock Screws.

After placing the scanner to the installation

site, remove the ADF Lock Screws and

place them into the Storage Holes. For

more details about positioning of the ADF

refer to "Appendix 4 Setting the position of

the ADF" on page 9.

Setting the ADF Paper Chute.

Hold the ADF paper chute and insert

its tabs into the holes on the rear side

of the ADF as shown in the figure

below so that the side guides facing

upwards.

2-2

Setting the Stacker

Mount the Stacker onto the scanner

aligning the protrusions to the holes on the

scanner.

You can fix the stacker at two positions: the

upper position or the lower position.

Connecting the Power cable.

Use only the AC cable included the

scanner package.

ATTENTION

Connect the Power cable to a power

outlet.

2.2 Connecting the scanner to

your PC

When running Windows 95 and/or Windows

NT 4.0, connect the scanner to your PC with

the SCSI interface cable. When running Win-

dows 98, Windows Me, Windows 2000 and/or