Fujitsu S1500 - ScanSnap Deluxe Bundle Güvenlik Önlemleri - Sayfa 3
Tarayıcı Fujitsu S1500 - ScanSnap Deluxe Bundle için çevrimiçi göz atın veya pdf Güvenlik Önlemleri indirin. Fujitsu S1500 - ScanSnap Deluxe Bundle 9 sayfaları. Color image scanner
Ayrıca Fujitsu S1500 - ScanSnap Deluxe Bundle için: Başlangıç Kılavuzu (8 sayfalar), Teknik Özellikler (3 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (9 sayfalar), Nasıl Kullanılır (4 sayfalar)
Sayfayı Yazdır
In one of the following situations, immediately turn off the ScanSnap, and disconnect the
power cable from the AC outlet or the USB bus power cable from the computer. Not doing so
may cause a fire or electric shock.
Smoke or heat coming from the ScanSnap is detected.
Strange noise or smell is detected.
Foreign objects (water, liquids, small metal objects, etc.) get inside the ScanSnap.
Other problems which indicate a ScanSnap failure are detected.
Then, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider. Never try fixing such problems by yourself. Doing so is dangerous.
Do not take apart or modify the ScanSnap as high-voltage components inside the ScanSnap
are dangerous. PFU assumes no liability to any damage caused by taking apart the
ScanSnap, as doing so is not covered under the warranty.
For ScanSnap S1500 or ScanSnap S1500M Users
The area around the part to which this warning label is affixed can become very hot.
To avoid burns, never touch around the area indicated by this label.
Firmly insert the power cable into the AC outlet or the USB bus power cable into the computer.
Not doing so may cause a fire or the ScanSnap to malfunction.
Use the ScanSnap only at the indicated power voltage and current. Do not connect to multiple-
power strips. Improper power voltage or current might cause a fire or electric shock.
Use only the power cable or the USB bus power cable provided with the ScanSnap. Do not
use any extension cords. Not following these instructions may cause abnormal heat or a fire.
Do not use the power cable or the USB bus power cable provided with the ScanSnap for other
devices, since this might cause problems such as an equipment failure, or an electric shock.
Do not install in a damp, oily, smoky, steamy, or dusty environment. Doing so may cause a fire
or electric shock.
Do not install the ScanSnap in the following locations which are subject to high temperature,
humidity, less ventilation, or dust. If placed in an area subject to high temperature, the cover
may become overheated and deformed, causing the ScanSnap to become hot, resulting in a
fire.
Use the ScanSnap in a well-ventilated environment.
A place near heat-radiating devices such as stoves or electric heaters, or flammable items
such as volatile inflammable materials or curtain.
A place such as a bathroom, shower room, or swimming pool where it may easily get wet.
A place under direct sunlight, in a car under the scorching sun, or near heating apparatus
where it may get hot.
To avoid injuries, do not place the ScanSnap in an area where small children may be able to
reach.
Before moving the ScanSnap, be sure to disconnect the power cable from the AC outlet, or the
USB bus power cable from the computer, and all other interface cables. Make sure that the
floor is free of any obstructions.
Do not move the ScanSnap while there are cables connected, doing so can damage the
cables, in turn causing fire, electric shock or injuries.
3