Fujitsu S510 - ScanSnap - Document Scanner Başlangıç Kılavuzu - Sayfa 27

Tarayıcı Fujitsu S510 - ScanSnap - Document Scanner için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu S510 - ScanSnap - Document Scanner 28 sayfaları. Color image scanner
Ayrıca Fujitsu S510 - ScanSnap - Document Scanner için: Kurulum Prosedürleri (3 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Başlangıç Kılavuzu (30 sayfalar), Temizlik Talimatları (2 sayfalar)

If the around the pick roller is dirty by paper

-powder, it may cause a scanning error.

Remove the dirt using a soft cloth moistened

with Cleaner F1.

* Do not use water, mild detergent or air-spray.

Remove the Pick roller from its shaft.

Pull out the shaft from the Pick roller while lifting up

its tab.

Tab

If you push up the pick roller tab using your

fingernail, your fingernail may be hurt or get

chipped. If you cannot push it up successfully

with your fingernail, use a paper clip to push

up the pick roller tab.

Attach the new Pick roller to the shaft.

Insert the shaft aligning the protrusion with the slot

on the new Pick roller.

Shaft

Install the Pick roller with its shaft to the scanner.

Insert the right end of the shaft to the roller bushing

(right), and set the shaft to the slot while lowering it.

Shaft

Pick roller

Slot

Protrusion

Shaft

10. Fix the Pick roller bushing (left) by rotating it in the

direction of the arrow.

Pick roller

Make sure that the Pick roller is

completely attached. Otherwise,

document jams or other feeding errors

may occur.

11. Attach the sheet guide to the scanner.

Pinch the pickup tabs on the sheet guide and attach

the sheet guide to the scanner.

Sheet guide

You should hear the sheet guide click when it

returns to its original position.

ScanSnap S510 Getting Started | 25

Bushing

Pick roller

bushing

Shaft

Pickup tab