Fujitsu ScanSnap iX500 Hızlı Kurulum Kılavuzu

Tarayıcı Fujitsu ScanSnap iX500 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Fujitsu ScanSnap iX500 3 sayfaları. Windows
Ayrıca Fujitsu ScanSnap iX500 için: Başlangıç Kılavuzu (17 sayfalar), Başlangıç Kılavuzu (16 sayfalar), Başlarken (18 sayfalar), Güvenlik Önlemleri (11 sayfalar), Manuel (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Wi-Fi Bağlantı Kılavuzu (41 sayfalar)

ScanSnap iX500 Quick Setup Guide

The Fujitsu ScanSnap iX500 is a high speed duplex scanner, meaning it scans both the front and back of a

document or photo at the same time at a rate of about 1 page every 1 to 2 seconds. It's ideal for

digitizing all of your family photos and important documents.

Setting up the Fujitsu ScanSnap scanning station

1: Turn on the laptop (for longer projects connect the power)

2: Plug the power cable into Fujitsu ScanSanp iX500

3: Plug the USB cable into the laptop then into the Fujitsu ScanSnap

4: Open the Fujitsu ScanSnap by lifting the top lid, this will become the paper feed (should hold 50

sheets of paper or 25 photos) Pull the next lid down, this will become a paper catch. This step isn't

necessary especially if you have thicker photos.

5: Once the laptop is turned on and the Fujitsu ScanSnap is connected to it you are ready to start

scanning.

Start scanning documents and photos with the Fujitsu Scansnap iX500

1: Spread the paper guide all the way to the edges of the page feeder if they are not already there.

2: Place documents or photos in the page feeder. A very helpful hint is to place the documents so the

back of the page is facing you and upside down in the page feeder, this will save you some work after

the pages are scanned.

3: Move the paper guide to fit snuggly next to the paper in the tray.

4: Press the Scan button on the Fujitsu ScanSnap iX500 (it should be lit in blue)

5: The documents or photos will start scanning.

While the documents or photos are scanning a window will appear on the laptop.