Fujitsu ScanSnap N1800 Başlangıç Kılavuzu - Sayfa 13
Tarayıcı Fujitsu ScanSnap N1800 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Fujitsu ScanSnap N1800 23 sayfaları. Google docs add-in user's guide network scanner
Ayrıca Fujitsu ScanSnap N1800 için: Broşür ve Teknik Özellikler (4 sayfalar), Yazılım Kılavuzu (22 sayfalar), Yazılım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
10.
Change the admin password.
On the [Admin Password] window, specify the
administrator password, and press the [Next] button.
The default value for the [Current Password] is
"password".
11.
Set the scanner's IP address.
On the [IP Address] window, set the scanner's IP
address, and press the [Next] button.
If DHCP is not used, do not use an IP address that
already exists in the network.
If the same IP address as the specified IP address
already exists, an error occurs.
12.
Set the DNS server.
On the [DNS Server] window, set the IP address for
the DNS server, and press the [Next] button.
If the scanner is not connected to the network, the
FQDN may not be displayed correctly.
13.
Set the Central Admin Server.
On the [Scanner Central Admin Server] window, set
whether to enable the Central Admin Server and the
Central Admin Server settings, and press the [Finish]
button.
13