Brother HL-3040CN Hızlı Kurulum Kılavuzu - Sayfa 22
Yazdırma Sunucusu Brother HL-3040CN için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Brother HL-3040CN 33 sayfaları. Hl-3000 series digital color printer
Ayrıca Brother HL-3040CN için: Yazılım Kılavuzu (1 sayfalar), Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar)
Sayfayı Yazdır
For Network Users
Web Based Management (web
browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
• The login name for the Administrator is 'admin'
(case sensitive) and the default password is
'access'.
• We recommend Microsoft
6.0 (or greater) or Firefox 1.0 (or greater) for
®
Windows
and Safari 1.3 (or greater) for
Macintosh. Please also make sure that
JavaScript and Cookies are always enabled in
whichever browser you use. To use a web
browser, you will need to know the IP Address
of the print server. The IP Address of the print
server is listed on the Print Setting Page.
a
Type http://printer_ip_address/ into
your browser.
(Where printer_ip_address is the IP
Address or the print server name)
For example: http://192.168.1.2/
See Chapter 10 of the Network User's
Guide.
22
®
®
Internet Explorer
Reset the network settings to the
factory default
To reset all network settings of the print server to its
factory default, follow the steps below.
a
Press the + or - to choose Network.
Press OK.
Network
b
Press the + or - to choose Factory Reset.
Press OK.
Factory Reset
c
Press OK again.
Restart Printer?
Print the Printer Settings Page
The Printer Settings Page lists all the current printer
settings, including network settings. To print the
printer settings page:
a
Press the + or - to choose Machine Info..
Press OK.
Machine Info.
b
Press OK again.
Print Settings
c
Press OK again to print the Printer Settings
Page.
Note
If the IP Address on the Printer Settings Page
shows 0.0.0.0, wait for one minute and try again.