Brother HL-4040CDN - Color Laser Printer Temizlik ve Bakım - Sayfa 4
Yazdırma Sunucusu Brother HL-4040CDN - Color Laser Printer için çevrimiçi göz atın veya pdf Temizlik ve Bakım indirin. Brother HL-4040CDN - Color Laser Printer 7 sayfaları. Print unable 2a or no waste toner error
Ayrıca Brother HL-4040CDN - Color Laser Printer için: Broşür (4 sayfalar), Hızlı Kurulum Kılavuzu (35 sayfalar), Parça Referans Listesi (40 sayfalar), Servis Güncelleme Kılavuzu (11 sayfalar)
Sayfayı Yazdır
7. Turn the drum unit over by holding the
green handles. Make sure that the drum
unit gears (1) are on the left hand side.
8. Look at a print sample to identify the color
causing the problem. The color of the
spots or print defect is the color of the
drum you should clean. For example, if
the spots or print defect is cyan, you
should clean the drum for cyan. Put the
print sample in front of the drum, and the
find the exact position of the poor print.
NOTE
The Cyan drum will be closest to you then further
out will be Magenta, then Yellow and Black will be
the farthest from you.
CAUTION
The drum is photosensitive and should not be
touched directly with your fingers or hand as it will
result in body oils being applied to the drum unit.
DO NOT attempt to clean the surface of the
photosensitive drum with any sharp object.
9. Turn the drum unit gear toward you by
hand while looking at the surface of the
drum (1).
10. When you have found the mark on the
drum that matches the print sample, wipe
the surface of the drum gently with a prep
pad or cotton swab until the dust or paper
powder on the surface comes off.
11. Allow the alcohol to evaporate from the
drum surface before continuing. In some
cases there maybe several areas on a
drum that require cleaning.
4
Ver. 122009