Fujitsu DynaMO 1300 Kullanıcı Kılavuzu - Sayfa 18

Depolama Fujitsu DynaMO 1300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu DynaMO 1300 50 sayfaları. 3.5-inch magneto-optical disk drive

Sayfayı Yazdır

Using the MO drive

Inserting MO Disk

Gently insert the MO disk with the label side up, as

shown, until the disk clicks into the place. Never force the

disk into the drive or insert the MO disk upside down as

this may damage the drive.

The access light will come on while the MO disk is

loaded. Wait for the access light to go off before using

disk. The 2.3GB and 1.3GB MO disk takes a little longer

to become ready after disk insertion.

• Since a floppy disk is about the same size as your

MO disk, be careful to never insert a floppy disk into

the MO drive.

• Do not insert foreign objects into the drive.

Ejecting MO Disk

You can eject an MO disk from the MO drive using the following methods.

For Windows users

For Windows XP and Windows 2000 users:

If the MO disk cannot be ejected, see How to use Eject and format privilege Tool.

Right-click the removable disk icon and select Eject from the pop-up menu.

For Macintosh users

Same manner as ejecting floppy disk, Drag and Drop the removable disk icon into the Trash icon.

For all users (Emergency Eject)

If the MO disk cannot be ejected properly as described above, or

appears to be jammed in the drive, the disk can be ejected using

Emergency Eject.

Turn off the MO drive and wait for 30 seconds or more

before ejecting the MO disk.

1. Straighten one end of a large paper clip.

2. Insert the straightened end of the paper clip into

the manual eject hole and press with moderate

force to eject the disk.

Eject button/Access Light

MO Disk

Eject Hole