Fujitsu DynaMO 1300 Kullanıcı Kılavuzu - Sayfa 42

Depolama Fujitsu DynaMO 1300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Fujitsu DynaMO 1300 50 sayfaları. 3.5-inch magneto-optical disk drive

Sayfayı Yazdır

Troubleshootings

Although the MO drive is designed to be highly reliable, you may occasionally experience problems. This

section describes problems you may encounter when using your MO drive. If you experience any problems

other than those outlined below, contact your dealer or FUJITSU subsidiary.

The power light does not light up.

• Is the AC adapter properly connected?

The computer does not recognize the MO drive.

• Is the power light on?

• Is the access light on?

• Is the SCSI cable connected properly?

• Is the SCSI ID selected properly?

• Is the device driver installed?

• Is the MO disk inserted correctly?

• Is the MO disk formatted correctly?

You cannot insert the MO disk.

• Is the drive power on?

• Is the MO disk being inserted in the correct direction?

• Is another MO disk already inserted?

You cannot eject the MO disk.

• Is the drive power on?

• Is the access light on?

• Is your application software preventing the disk from being ejected?

• For Windows XP and Windows 2000 users:

If you want to allow all users to eject/format the MO disks, use the Eject/format privilege tool and change

the settings with Administrator Privilege. See How to use Eject and format privilege Tool.

You cannot record data on the MO disk.

• Is the MO disk write-protected?

• Is the MO disk formatted?

• Is the device driver installed?