Fujitsu eternus af Yapılandırma Kılavuzu - Sayfa 20
Depolama Fujitsu eternus af için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu eternus af 28 sayfaları. Fibre channel for citrix xenserver
Ayrıca Fujitsu eternus af için: Yapılandırma Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (32 sayfalar), Yapılandırma Kılavuzu (43 sayfalar)
Sayfayı Yazdır
Chapter 7
Installing the iSCSI Software Initiator and Setting Up the Server
7.2
Setting Up the Server
Passwords are restricted to a maximum of 16 characters by the Solaris operating system. For 17 or
more characters, the following message is output:
Iscsiadm: secret too long, maximum length is 16
Iscsiadm: Unable to complete operation
2
Set the Initiator CHAP Name.
The Initiator Node Name is the default Initiator CHAP Name. Use the "iscsiadm" command to set a new
Initiator CHAP Name.
The Initiator CHAP Name set here must match that set in Target information.
# iscsiadm modify initiator-node --CHAP-name
Enter the CHAP name for the underlined portion.
Example:
To set "initiator" as the CHAP Name
# iscsiadm modify initiator-node --CHAP-name initiator
3
Enable CHAP authentication.
Enable CHAP authentication on the Initiator.
# iscsiadm modify initiator-node --authentication CHAP
4
Check that CHAP is enabled on the Initiator. Use the "initiator-node" option.
# iscsiadm list initiator-node
Initiator node name: iqn.1986-03.com.sun:01:00144f565a49.47677520
Initiator node alias: -
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (iSCSI) for Oracle Solaris
Login Parameters (Default/Configured):
Header Digest: NONE/-
Data Digest: NONE/-
Authentication Type: CHAP
CHAP Name: initiator
RADIUS Server: NONE
RADIUS access: unknown
Configured Sessions: 1
Copyright 2017 FUJITSU LIMITED
20
P3AM-4042-18ENZ0