Fujitsu ETERNUS DX Disk Yapılandırma Kılavuzu - Sayfa 22

Depolama Fujitsu ETERNUS DX Disk için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX Disk 25 sayfaları. Server connection, fcoe for linux driver settings for converged network adapter cards
Ayrıca Fujitsu ETERNUS DX Disk için: Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (29 sayfalar), Yapılandırma Kılavuzu (32 sayfalar), Yapılandırma Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (31 sayfalar), Yapılandırma Kılavuzu (43 sayfalar), Yapılandırma Kılavuzu (21 sayfalar), Yapılandırma Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Fujitsu ETERNUS DX Disk Yapılandırma Kılavuzu

Chapter 8

Setting Up Oracle VM Server

8.4

Checking the Multipath

8.4

Checking the Multipath

The Oracle VM Server multipath improves path redundancy.

Because the multipath function is enabled by default, a multipath configuration is automatically set when a

server with Oracle VM Server and the ETERNUS DX/AF are connected.

The multipath setting does not need to be changed.

Execute the "multipath -ll" command to check the items shown below.

Example:

When the ETERNUS DX60 S4 is connected in a two-path configuration

The multipath consists of the block device names "sdb"

and "sdn". "3600000e00d10000000100105006c0000"

is created.

# multipath -ll

3600000e00d10000000100105006c0000 dm-0 FUJITSU,ETERNUS_DXL

size=2.0G features='1 queue_if_no_path' hwhandler='0' wp=rw

|-+- policy='round-robin 0' prio=50 status=active

| `- 1:0:0:1 sdc 8:32

`-+- policy='round-robin 0' prio=10 status=enabled

`- 2:0:0:1 sdg 8:96

The settings for the ETERNUS DX/AF are stored in the multipath configuration file, "/etc/multipath.conf".

When connecting the ETERNUS DX500 S4/DX600 S4, the ETERNUS DX500 S3/DX600 S3, the ETERNUS

DX8700 S3/DX8900 S3, the ETERNUS AF650 S2, or the ETERNUS AF650, check the "/etc/multipath.conf" file

for the system that is used and apply the necessary changes to the file according to the following exam-

ple.

Example:

•

Add "|ETERNUS_DXM|ETERNUS_DXH" to the "product" line.

devices {

device {

}

8.5

Installing and Setting Oracle VM Manager

Refer to the Oracle VM manuals for details.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle VM Server for x86

active ready running

Two block device names are

displayed for a two-path

configuration.

vendor "FUJITSU"

product "ETERNUS_DXL|ETERNUS_DX400|ETERNUS_DX8000|ETERNUS_DXM|ETERNUS_DXH)"

prio alua

path_grouping_policy group_by_prio

path_selector "round-robin 0"

failback immediate

no_path_retry 10

}

"ETERNUS_DXL" is displayed since

the ETERNUS DX60 S4 is connected.

When the path status is normal,

"active ready" is displayed.

Add "|ETERNUS_DXM|ETERNUS_DXH"

P3AM-6612-14ENZ0