Fujitsu ETERNUS DX Disk Yapılandırma Kılavuzu - Sayfa 3

Depolama Fujitsu ETERNUS DX Disk için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Fujitsu ETERNUS DX Disk 24 sayfaları. Server connection, fcoe for linux driver settings for converged network adapter cards
Ayrıca Fujitsu ETERNUS DX Disk için: Kullanıcı Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (42 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (44 sayfalar), Yapılandırma Kılavuzu (28 sayfalar), Yapılandırma Kılavuzu (29 sayfalar), Yapılandırma Kılavuzu (25 sayfalar), Yapılandırma Kılavuzu (32 sayfalar), Yapılandırma Kılavuzu (35 sayfalar), Yapılandırma Kılavuzu (31 sayfalar), Yapılandırma Kılavuzu (43 sayfalar), Yapılandırma Kılavuzu (21 sayfalar)

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running Linux via a SAS interface.

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, SAS cards, and drivers.

Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as

product trademarks and product names. For storage systems that are supported by the OS, refer to the Server

Support Matrix of the ETERNUS DX.

The Contents and Structure of this Manual

This manual is composed of the following ten chapters.

"Chapter 1 Workflow" (page 6)

•

This chapter describes how to connect the ETERNUS DX storage systems to a server running Linux.

"Chapter 2 Checking the Server Environment" (page 10)

•

This chapter describes which servers can be connected to ETERNUS DX storage systems.

"Chapter 3 Notes" (page 11)

•

This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and

server.

"Chapter 4 Setting Up the ETERNUS DX" (page 13)

•

This chapter describes how to set up the ETERNUS DX storage systems using ETERNUS Web GUI.

"Chapter 5 Setting Up the SAS Switches" (page 14)

•

This chapter describes how to set up the SAS switches.

"Chapter 6 Installing the Driver" (page 16)

•

This chapter describes how to install the SAS card driver.

"Chapter 7 Setting Up the Server" (page 17)

•

This chapter describes how to make the server recognize the SAS card.

"Chapter 8 LUN Recognition" (page 18)

•

This chapter describes how to make the server recognize the LUNs of the ETERNUS DX.

•

"Chapter 9 Setting Up and Checking the Multipath Driver" (page 21)

This chapter describes how to set multipaths for multipath connection.

"Chapter 10 Setting a File System" (page 22)

•

This chapter describes how to create a file system.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

Preface

14th Edition

April 2018

P3AM-3472-14ENZ0